Field Software Upgrade
As you transition to a new network infrastructure, how
can you gain better control over the many legacy
network elements that may be incompatible with this
new infrastructure? Application and network redesign,
interoperability testing, and configuration of new
network elements will be interruptive and costly. A part
of your solution is built into the DT-4000.
|
|
Smart Network Management
The DT-4000 is manageable via StarKeeper II NMS,
SNMP manager and local/remote console.
DT-4000 Remote Access and Concentration
The configuration at left is one option of many.
However, it does depict some of the interesting
interface capabilities of the DT-4000.
The DT-4000 on the left communicates with the BNS-2000/
BNS-2000 VCS network via a serial
SAMSL/SAMML trunk. It also communicates with IP
network end-points via a 10BaseT interface. It can also
communicate with any TCP based IP end-point.
Note: Both the IP-DSU trunking and standard TCP
communications are simultaneously taking place on the
10BaseT interface.
Other protocols on the 10BaseT such, as SNMP, Telnet,
ARP, etc., are not shown for simplicity of the diagram.
|